Buying used ski boots
Boots are the most personal piece of ski equipment, and fit matters more than brand or model. Used boots can be a great value if you check the size, the shell and the soles.
Understand the size
- Mondopoint is the length of the foot in centimeters (for example 25.5). Measure the skier's foot standing, heel against a wall, and compare it to the number printed on the boot shell.
- Several mondopoint sizes often share one shell (for example 25.0 and 25.5), so the shell size matters more than the half size.
- Boot sole length (BSL) in millimeters is printed on the heel or side. Your shop needs it to adjust bindings.
- Last width (in mm, when the maker lists it) tells you how roomy the forefoot is. Race boots are usually narrow.
Do a shell fit
Take the liner out, put the bare foot in the shell, and slide the foot forward until the toes just touch the front. Check the gap behind the heel:
- About one finger's width is a snug, performance or race fit.
- About two fingers is a comfortable recreational fit.
- More than that is usually too big, however tempting it is to buy room to grow.
Then put the liner back in and try them buckled, standing in a flexed ski stance for a few minutes. Toes may lightly touch the front when standing straight and should pull back when you flex forward.
Inspect the boot
- Shell: look for cracks around the buckles, the tongue and the cuff hinge. Plastic gets brittle with age and cold.
- Soles: the toe and heel are what the binding holds, so heavy wear can stop bindings releasing correctly. Many boots have replaceable sole pads; if they're worn down and can't be replaced, pass on the boot. Have a shop check them.
- Buckles and straps: check they close firmly and nothing is bent or missing. Many parts can be replaced, but factor in the cost.
- Liners: heat-molded liners take the previous owner's shape. That's often fine, and many shops can re-mold or replace liners.
Flex
Flex numbers aren't standard between brands, but within a brand, higher is stiffer. Pick a flex the skier can actually bend: lighter skiers and juniors need softer boots. A boot fitter can help match flex to weight and ability.
Bindings must match
Bindings have to be adjusted for each boot's sole length and the skier's weight, height, age and ability. Take boots and skis to a certified shop together before skiing.